User’s Manual of netMod Network Termination Unit
11. Terminal Portability (TP)
The subscriber can suspend an active call and then resume it within three minutes from
the same or another analogue or ISDN terminal.
Suspend an active call by pressing:
• The keys FLASH*19#
or
• The keys
FLASH*19*X#
where X (0..9) is the call id.
Resume a suspended call on the analogue ports by pressing:
• The keys #19#
or
• The keys
#19*X#
where X (0..9) is the call id.
12. Call Diversion
When the Call Diversion service is activated all incoming calls that refer to the number of
the called subscriber, are forwarded conditionally or unconditionally to another number
destination pre-selected by the called subscriber.
Some of the Call Diversion services are directly linked to the Multiple Subscriber Number
service. The subscriber has to assign MSN numbers to the analogue ports of netMod to
make the call diversion service functional.
Up to three different MSN numbers can be assigned on each analogue port, and are
stored in netMod’s corresponding memory locations. For each assigned MSN number, the
call diversion service can be activated / deactivated. The settings concerning this service
are permanently stored in netMod’s memory.
2
To Next Page
Loading...
