Invacare G50 - 7.19.2 Repairing a flat tyre (type 3.10;4.50-6 pneumatic tyres)

Invacare
®
- G50
SERVICE INSTRUCTIONS
99
7.19.2 Repairing a flat tyre (type 3.10/4.50-6 pneumatic tyres)
Pre-requisites:
• Flat screwdriver
• 10 mm Allen key
• 24 mm open-ended spanner
• Repair kit for tyres with inner tube or a new hose.
• Talcum powder
Removing the wheel
• Jack up the vehicle (Place a piece of wood under
the frame).
• Carefully remove the cover cap (1) using the flat
screwdriver.
• Use the Allen key to secure the axle (2) and
loosen the nut on the inner side of the rocker
(covered) with the open-ended spanner.
• Pull off the wheel and the axle in an outward
direction.
PLEASE NOTE
Assembly is carried out in the reverse order. Please ensure that the wheel is re-fitted on the
same side and in the same running direction it was in before removal.