Invacare G50 - 5 Maintenance plan (once a year)

SERVICE INSTRUCTIONS
Invacare
®
- G50
16
5 Maintenance plan (once a year)
Component Check for Measures

Seating Unit
Armrests / Armrest pads
• Damage / wear • Replace
• Check that all screws are
tight
• Tighten
Backrest (Cushion / Sling)
• Damage / wear • Replace
Backrest (Frame, Fixation
parts)
• Damage / wear • Replace
• Check that all screws are
tight
• Tighten
Seat cushion
• Damage / wear • Replace
Actuator / actuator cable
(if available)
• Damage • Replace
• Function • Check that the cable is
firmly connected, if
necessary replace cable
or actuator (See "
Testing
an actuator motor
" on
page
101)
• Check function of the
CLAM, if necessary
replace CLAM (See
"
Replacing electronics
components
" on page
77)
• Check that all screws are
tight
• Tighten
Opening mechanism of the seat unit (Easy Battery Access system)
Unlocking mechanism
• Damage, correct function • Replace damaged/worn
parts
Swing-up mechanism,
latching mechanism, gas
pressure spring
• Damage, correct function • Replace
• Check that all screws are
tight
• Tighten
Electrical System
Driving Programme
• Check the programme
version of the driving
electronics. Is there a
newer version available?
• Update the software. See
"
Updating the driving
program
" on page 92
Batteries / battery cable
• Damage • replace (See "
Changing
the batteries
" on page
79)
• Battery voltage • Charge batteries