BIOS Setup
[10 sec]
[20 sec]
[30 sec]
[40 sec]
USB mass storage device Start Unit command
time-out.
Maximum time the device will take before it
properly reports itself to the Host Controller. 'Auto'
uses default value: for a Root port it is 100 ms, for
a Hub port the delay is taken from Hub descriptor.
[Auto]
[Floppy]
[Forced FDD]
[Hard Disk]
[CD-ROM]
Mass storage device emulation type. 'AUTO'
enumerates devices according to their media
format. Optical drives are emulated as 'CDROM',
drives with no media will be emulated according to
a drive type
Note: 1* The “Mass Storage Device” is showed in SETUP screen when plugged USB Mass storage.
To Next Page
Loading...