INVT Goodrive300-19 Series - Page 139

Goodrive300-19 series open loop vector inverter special for hosit Basic operation instruction
-138-
Keypad running
command channel
(P00.01=0)
Terminal running
command channel
(P00.01=1)
Terminal running
command channel
(P00.01=1)
MODBUS
communication
channel
Reserved
Start
Select running command
channel (P00.01)
Select the shifting channel
between motor 1 and motor 2
(P08.31)
Terminal function 35
Shift motor 1 to motor 2
Communication
set value
2009H
Motor 1 Motor 2
Invalid
Valid
BIT0~1=00
BIT0~1=01
P08.31=0
P08.31=1
P08.31=2
The control performance of the inverter is based on the established accurate motor model. The user
has to carry out the motor autotune before first running (take motor 1 as the example).