INVT Goodrive300-19 Series - Page 76

Goodrive300-19 series open loop vector inverter special for hosit Function parameters
-75-
Function
code
Name
Detailed instruction of parameters
Default
value
Modify
P05.23
Switch-off
delay of S5
terminal
0.000s
○
P05.24
Switch-on
delay of S6
terminal
0.000s
○
P05.25
Switch-off
delay of S6
terminal
0.000s
○
P05.26
Switch-on
delay of S7
terminal
0.000s
○
P05.27
Switch-off
delay of S7
terminal
0.000s
○
P05.28
Switch-on
delay of S8
terminal
0.000s
○
P05.29
Switch-off
delay of S8
terminal
0.000s
○
P05.30
Switch-on
delay of HDI
terminal
0.000s
○
P05.31
Switch-off
delay of HDI
terminal
0.000s
○
P05.32
Lower limit
of AI1
The function code defines the relationship between
the analog input voltage and its corresponding set
value. If the analog input voltage beyond the set
minimum or maximum input value, the inverter will
count at the minimum or maximum one.
When the analog input is the current input, the
0.00V
○
P05.33
Correspondin
g setting of
the lower limit
of AI1
0.0%
○