INVT Goodrive300-19 Series - Page 89

Goodrive300-19 series open loop vector inverter special for hosit Function parameters
-88-
Function
code
Name
Detailed instruction of parameters
Default
value
Modify
35: Maladjustment (STo)
36: Underload fault (LL)
37~38: Reserved
39: Inverter enabling fault (dIS)
40: Contactor feedback fault (TbE)
41: Brake feedback fault (FAE)
42: Torque verification fault (TPF)
43: Joystick zero fault (STC)
44: Hierarchical reference fault (STEP)
45: Analog speed reference deviation fault (AdE)
P07.33
Running
frequency at
current fault
0.00Hz
●
P07.34
Ramp
reference
frequency at
current fault
0.00Hz
P07.35
Output
voltage at
current fault
0V
P07.36
Output
current at
current fault
0.0A
P07.37
Bus voltage
at current
fault
0.0V
P07.38
Max.
temperature
at current
fault
0.0°C
P07.39
Input
terminals
state at
0
●