Goodrive300-19 series open loop vector inverter special for hosit Safety precautions
-8-
the inverter during maintenance and component replacement.
Note:
Please select proper torque to tighten screws.
Keep the inverter and components away from combustible materials during maintenance and
component replacement.
Do not carry out any isolation and pressure test on the inverter and do not measure the control
circuit of the inverter by megameter.
Carry out a sound anti-electrostatic protection to the inverter and its internal components during
maintenance and component replacement.
1.4.4 What to do after scrapping
There are heavy metals in the inverter. Deal with it as industrial effluent.
To Next Page
Loading...
Need help?
General