INVT iMars MG series grid-tied solar inverters Monitoring communication
The software of iMars WinExpert can check the configuration of WiFi200 and this method can be
used in the direct monitoring and router LAN monitoring.
Please download the monitoring software of iMars WinExpert and the operation instruction on
www.invt-solar.com.
WinExpert software introduction: WinExpert software can support two kinds of communication
mode of serial port and network. When WiFi100 monitors the inverter, it is necessary to select
network monitoring.
Note: because of 485 communication and the influence of the WiFi100 communication converter,
at the same time only one computer or mobile phone can transmit data with the inverter through
WiFi100 converter; otherwise there will be data conflict to make WinExpert or PhonExpert
monitoring software display the wrong data, and even lead to monitor software has burst
automatically and shut down.
Install WinExpert software on the computer (Microsoft XP or Win7 operating system).
Click "Set" menu to select "Set communicate information" menu.
- 61 -