INVT SV-DA200 User Manual

SV-DA200 series AC servo drives Faults and solutions
‐149‐
After this operation, all parameters (P0~P6 group) can be restored to the default value.
Setting value Function
[0] Disabled
1 Enabled
P4.92*
Data size 16bit Data format DEC
Modbus address 1984,1985 CANopen address 0x245C,0x00
P4.93*
Reading enable of fault
record
Setting range Default Unit Available mode
0~1 0 - P S T F
This parameter can set the enabling of reading the fault record.
Setting value Function
[0] Disabled
1 Enabled
P4.93*
Data size 16bit Data format DEC
Modbus address 1986,1987 CANopen address 0x245D,0x00
P4.94*
Clearing enable of fault
record
Setting range Default Unit Available mode
0~1 0 - P S T F
This parameter can set the enabling of clearing the fault record.
Setting value Function
[0] Disabled
1 Enabled
P4.94*
Data size 16bit Data format DEC
Modbus address 1988,1989 CANopen address 0x245E,0x00
P4.95*
Group number of fault
record
Setting range Default Unit Available mode
0~9 0 - P S T F
This parameter can set the group number of fault record.
0 corresponds to the group 1 fault recorded which is also the latest one, 9 corresponds to group
10 fault recorded which is also the earliest one.
P4.95*
Data size 16bit Data format DEC
Modbus address 1990,1991 CANopen address 0x245F,0x00
P4.96* Factory parameters
Setting range Default Unit Available mode
- 0 - P S T F
-
P4.96*
Data size 16bit Data format DEC
Modbus address 1992,1993 CANopen address 0x2460,0x00
P4.97*
EEPROM operation of
communication encoder
Setting range Default Unit Available mode
0~1 0 - P S T F
All the motor parameters can be written into the EEPROM and during the starting, the drive will

INVT SV-DA200 Specifications

General

Brand	INVT
Model	SV-DA200
Category	Servo Drives
Language	English