INVT SV-DA200

SV-DA200 series AC servo drives Control mode applications
‐56‐
 Users can use either the 24V power supply carried by the servo drive (it only can provide 100mA
current) or 12V~24V power supply provided by the user.
4.5.2 Wiring of the pulse input circuit
Connect mode 1: Differential mode
 The maximum frequency of input pulse is 4MHz and the input signal voltage is ±5V;
 With the best anti-noise capability, this signal transmit method is recommended as the preferred.
Connection mode 2: Open collector mode 1
The control module is NPN (common cathode)
The control module is PNP module (common anode):