Configuration / Recording
Under the Configuration section, select the Recording tab to enable the Media Recorder to
store video on the MicroSD card. This section allows you to perform the following operations:
x Enabled – Enable the Edge Recording
x General
Global settings applied to the recorder module.
o NVR Detection Mode – Method used to detect a connection loss with the
NVR (VMS) server
o Server Ping – The connection is declared active as long as the
ATOMAS can ping the VMS at a regular interval.
Timeout – Duration in seconds to detect a NVR connection loss.
Ping IP Address – NVR Server IP address
o HTTP Internal API – The connection is declared active as long as the
ATOMAS receives HTTP requests from the VMS
Timeout – Duration in seconds to detect a NVR connection loss
o RTSP Internal API – The connection is declared active as long as the
ATOMAS receives RTSP keep alive requests.
Timeout – Duration in seconds to detect a NVR connection loss
To Next Page
Loading...
