33
services are offered and provided exclusively by IERCC and not by Iridium, which is a separate,
unrelated company. Standard airtime charges will apply to SOS calls to the IERCC; a valid Iridium
SIM subscription and online registration at https://my-geos.com/registration
is required. Please
review the privacy policy and terms of use for IERCC Travel Safety Group before using this service
as these are the terms that will govern your relationship with IERCC.
Configuring SOS settings
You must configure the SOS feature in order for the SOS to make an emergency call to
a designated Call Recipient. Failure to configure the SOS feature will result in no call
being sent when the SOS button is pressed. This could prevent or delay an emergency
response and result in serious injury or death.
Use the Settings menu in the Iridium GO! exec application to configure SOS while paired to the
Iridium GO! exec. Only one SOS emergency contact setting can be stored per Iridium GO! exec,
so multiple users will all share the same SOS settings. It is important to plan accordingly. The SOS
settings will provide the option to use or not use the IERCC service.
NOTE: The ability to modify SOS Settings is provided to admin users in the event an admin pin is
set.
To use IERCC service:
1. You must first register at https://my-geos.com/registration
from a web browser on your
computer or smart device.
NOTE: To register, you will need your Iridium line 1 phone number (Please refer to the device
information under the settings menu for the line 1 phone number) and Iridium GO! exec IMEI
(shown on the device label on the base of the Iridium GO! exec).
2. After registration, access SOS Settings on the Iridium GO! exec app, select Use IERCC, and
enter the 5-digit authorization code provided by IERCC, then Submit. (See section SOS
Settings)
3. If successful, your SOS settings will appear, and the SOS action is set to Call for the IERCC
service.
4. Once completed, store your SOS settings on the Iridium GO! exec device:
To Next Page
Loading...
