TH4330,4290,4260
6
BEFORE OPERATION
(1) Set up an operation plan with sufficient time allo-
wance. A tight plan may result in unexpected acci-
dents when work has to be rushed.
(2) Inspect and service the machine periodically in ac-
cordance with the instructions given in the operation
manual to maintain the machine in best condition.
Pay special attention to the controls, especially to the
brakes and clutch, and safety measures for the
machine functions properly and performs normally,
the chance of an accident will be reduced greatly.
If safety devices are damaged or do no work, please
consult your ISEKI dealer.
(3) Before removing a safety devices, such as a safety
cover, be sure that the machine has stopped com-
pletely. Never forget to replace the removed part after
servicing.
(4) Never inject fuel while the engine is running or is still
hot. Keep away from open fires an never smoke
around a fuel tank or while fueling into the machine.
Never use open flames for illumination when fueling
the machine at night.
STARTING ENGINE AND MOVING TRACTOR
(1) Before starting the engine indoors, make sure that
there is proper ventilation because exhaust fumes
contain poisonous carbon monoxide, which cause
lethal poisoning.
(2) Before starting the machine, confirm that the trans-
mission gear has been shifted to the appropriate
speed, that there is no one near the machine, and
that the implement is securely installed on the
machine.
Always operate the machine from the operator`s
seat. Never leave the seat except in an emergency
when operating the machine.
(3) Before starting to move, pay attention to safety condi-
tions around the machine to avoid injury to
bystanders or damage to property. Never move
abruptly.
FIG. 1-6
FIG. 1-7
FIG. 1-8
FIG. 1-9
To Next Page
Loading...
