Iseki TH4330 - Mechanical Transmission Specifications

SPECIFICATIONS
85
MODEL: TH4260F TH4290F
SUB MODEL: MDRE / MDE DRE MDRE / MDE DRE
ENGINE:
Make Iseki Diesel
Model E3CE-VB12 E3CF-VB24
Type Indirect injection, overhead valve
Aspiration Natural
Displacement 1430 cc 1463 cc
Number of Cylinders 3
Bore 85 mm 86 mm
Stroke 84 mm
Engine Horsepower (Gross) 25.3 HP (18.9 kW) @ 2500 rpm 28.4 HP (21.2 kW) @ 2500 rpm
(Net) 24.0 PS (17.7 kW) @ 2500 rpm 28.0 PS (20.6 kW) @ 2500 rpm
Firing Order 1-3-2
Compression Ratio 21.5 to 1 21.7 to 1
Low Idle Speed 900-1000 rpm 930-970 rpm
High Idle Speed 2650-2750 rpm 2650-2750 rpm
Valve Clearance (Cold) ; Intake 0.35 mm
Exhaust 0.35 mm
Air Cleaner Dual stage, dry element
Engine Cooling Liquid, forced circulation
Cold Starting Aid Glow plugs (3)
TRANSMISSION:
Type Gear Type, 3 speeds forward, 1 reverse with 3 speed range
Gear Speeds 9 gears forward, 3 reverse
Clutch
Dual clutch (φ215 mm)
Brakes Mechanically actuated sealed wet disk
POWER TAKE-OFF (PTO):
Type Transmission driven
Control Sliding gear and disk clutch
Rear PTO; Shaft 35 mm diameter, six spline
Output Clockwise rotation
Engine Speed @ engine rpm 581 @2500 rpm
Mid PTO; Shaft
25.4 mm diameter
fifteen spline
-
25.4 mm diameter
fifteen spline
-
Output Clockwise rotation - Clockwise rotation -
Mid PTO Speed @ engine rpm 2000 @ 2500 rpm - 2000 @ 2500 rpm -
HYDRAULICS:
Steering System; Type Hydrostatic (power)
Pump Engine-mounted gear pump
Maximum Output 9.8 l/min at 2500 rpm
Pressure 11772 kPa
Main Hydraulic System; Pump Engine-mounted gear pump
Maximum Output 28.0 l/min at 2500rpm
Pressure Relief valve setting 14715 kPa
Rear Linkage; Type Three-point hitch
Size Category 1
Control Position (OPT draft control)
Lift Capacity
1100 kg measured at ball ends
800 kg measured at 24" behind
MECHANICAL TRANSMISSION