Iseki TH4330 - Tractor Specifications; Hydrostatic Transmission Specifications

TH4330,4290,4260
82
MODEL: TH4260FH TH4290FH TH4330FH
SUB MODEL: MRE / ME MRE / ME MRE / ME
ENGINE:
Make Iseki Diesel
Model E3CE-VB11 E3CF-VB22 E3CD-VB32
Type Indirect injection, overhead valve
Aspiration Natural
Displacement 1430 cc 1463 cc 1498 cc
Number of Cylinders 3
Bore 85 mm 86 mm 87 mm
Stroke 84 mm
Engine Horsepower (Gross) 25.3 HP (18.9 kW) @ 2500 rpm 28.4 HP (21.2 kW) @ 2500 rpm 33.0 HP (24.6 kW) @ 2600 rpm
(Net) 24.0 PS (17.7 kW) @ 2500 rpm 28.0 PS (20.6 kW) @ 2500 rpm 32.0 PS (23.5 kW) @ 2600 rpm
Firing Order 1-3-2
Compression Ratio 21.5 to 1 21.7 to 1
Low Idle Speed 900-1000 rpm 930-970 rpm 980-1020 rpm
High Idle Speed 2650-2750 rpm 2650-2750 rpm 2760-2860 rpm
Valve Clearance (Cold) ; Intake 0.35 mm
Exhaust 0.35 mm
Air Cleaner Dual stage, dry element
Engine Cooling Liquid, forced circulation
Cold Starting Aid Glow plugs (3)
TRANSMISSION - HYDROSTATIC:
Type ; Primary Infinite Control
Range 3 speeds constant mesh
Gear Speeds 3 gears forward, 3 reverse
Clutch None
Brakes Mechanically actuated sealed wet disk
POWER TAKE-OFF (PTO):
Type Independent, engine driven
Control Electro-hydraulic control
Clutch Hydraulically engaged, multi-plate wet disk
Rear PTO; Shaft 35 mm diameter, six spline
Output Clockwise rotation
Engine Speed @ engine rpm 581/1050 @2500 rpm 604/1092 @2600 rpm
Mid PTO; Shaft 25.4 mm diameter, fifteen spline
Output Clockwise rotation
Mid PTO Speed @ engine rpm 2000 @ 2500 rpm 2080 @ 2600 rpm
HYDRAULICS:
Steering System; Type Hydrostatic (power)
Pump Engine-mounted gear pump
Maximum Output 9.8 l/min at 2500 rpm 10.2 l/min at 2600 rpm
Pressure 11772 kPa
Main Hydraulic System; Pump Engine-mounted gear pump
Maximum Output 28.0 l/min at 2500rpm 29.2 l/min at 2600rpm
Pressure Relief valve setting 14715 kPa
Rear Linkage; Type Three-point hitch
Size Category 1
Control Position (OPT draft control)
Lift Capacity
1100 kg measured at ball ends
650 kg measured at 24" behind
SPECIFICATIONS
HYDROSTATIC TRANSMISSION