20
Options and versions
There are several possible configurations and options available. Each configuration can be Standard
or Single Action version, with battery, DC power or both. DC power can be supply via concealed
cable gland spring or door sensor contacts. You can decide to install only an external RFID reader or
keyboard option too. You can add a remote opening button using the optoisolated input. Or you can
drive a motorized swing door operator, or interface to a home automation system, using the outputs
relay* built-in into the lock.
In the next examples you can find the 3 main configurations, named A, B and C:
A. Alkaline batteries powered.
B. DC power supply via cable gland spring plus alkaline batteries as back-up (facultative).
C. DC power supply via door sensor contacts plus alkaline batteries (mandatory).
Single Action version does not require the Internal control module.
*To use the built-in relay it is necessary to power the lock by external power supply
using a cable gland spring.
To Next Page
Loading...
Need help?
General
