41
Door Info menu
Open the Argo app and then present the Master Card to the reader, to enter Programming Mode.
Then press Door Info icon in the bottom bar. In this menu, you can change the door name as
previously seen, and you can see some more information about x1R Smart.
It shows the battery charge status or, in case of
external power supply, the icon.
It shows the total number of users stored as phone,
card/tag, PIN or Invitations. Up to a maximum of 300
users can be stored.
For more information about Invitation see the Argo
User Manual at link: https://app.iseo.com.
Enable the automatic Passage Mode. To know more
about this function go to Argo User Manual available
at web link: app.iseo.com
Master Card set and Master Card level in use.
See Advanced Function chapter.
Device date, time and timezone. Everytime you
enter Programming Mode the phone send time and
date to the x1R Smart.
See Argo User Manual on app.iseo.com
To Next Page
Loading...
Need help?
General
