47
Reset
In this menu you can find 2 different and powerful kinds of reset:
Tap this button to restore all the device settings to the
default ones. All the editable parameters, like for
example Default User Settings, Door Opening Time,
Sound, Bluetooth parameters, etc...Will change back to
the default values, originally set in the Argo app.
Tap this button to fully reset your doorlock. This
function is useful for example, when you need to send
back the device for repair and you need to remove the
Master Card plant code from it.
A warning pop-up will advise you that it will cause the
removal of the Master Card and the cancellation of the
entire user list. All device parameters will come back
to Factory mode.
Restore Default Doorlock Settings.
Reset Doorlock to Factory Mode.
To Next Page
Loading...
Need help?
General
