32
Add a PIN code without Argo app
You can add one or more codes to open, using the Master Card and the external keyboard.
1. Present the Master Card 1 to the
device to enter Programming Mode.
2. The device emits 3 acoustic signals
together with 2 green light signals.
3. Enter your PIN code, from 4 to 14 characters,
and confirm by # key.
4. For each added code the device emits 2
acoustic signals together with 2 green light
signals, to confirm the operation.
5. At the end of the operation present again the
Master Card 1 to exit Programming
Mode.
The PIN code must be minimum 4 characters to maximum of 14 characters.
The device goes automatically out of Programming Mode after 3 min. of inactivity.
To Next Page
Loading...
Need help?
General
