29
Installing x1R Smart
First switch on
When you switch on x1R Smart the first time, the device automatically update, if necessary,
connected devices: external and internal control modules and the Bluetooth radio module.
Device Initialization
The new device is in Factory mode configuration, meaning with the list of authorized user empty
and no system code yet assigned. In this configuration it can be opened by any Mifare card or Tag
or, if keyboard is present, by any code, with a minimum of 4 and a maximum of 8 digits code,
confirmed by number sign “#”.
For this operation refers to the Installation Guide included in the product box and
available at link:
https://app.iseo.com > Argo > Installation Guides
This operation, that keeps about 20 seconds, is indicated to the user by the
orange led, in the external module, continuously flashing.
Do not switch off x1R Smart during this operation and do not press any button or
disconnect any cable, in order to avoid device malfunctions.
In Factory mode the external control module orange light flashes 2 time, before the
standard opening and closing signal, delaying those operations in order to show the
device not initialized.
To Next Page
Loading...
Need help?
General
