31
Add credentials without Argo App
You can add credentials, such as Mifare cards or tags, using the Master Card and the RFID reader
placed in the external control module.
1. Present the Master Card 1 to the
device to enter Programming Mode.
2. The device emits 3 acoustic signals
together with 2 green light signals.
3. Read the Cards to add it to the User List.
4. For each added Card the device emits
2 acoustic signals together with 2 green
light signals, to confirm the operation.
5. At the end of the operation present again the
Master Cards 1 to exit Programming Mode.
The device goes automatically out of Programming Mode after 3 min. of inactivity.
To Next Page
Loading...
Need help?
General
