ISHIDA WM-4000 User Manual

WM-4000 AUTOMATIC WRAPPER
Error Codes and Solutions
600 – 2099
March 2015

ISHIDA WM-4000 Specifications

General

Brand	ISHIDA
Model	WM-4000
Category	Industrial Equipment
Language	English

Summary

WM-4000 Automatic Wrapper Error Codes and Solutions

0601: The Applicator Was Not Connected

Error indicating the applicator is not connected to the console.

0602: There Is No Response From the Applicator

Error showing no communication response from the applicator.

0603: The Problem Arose in the Applicator

Error indicating a problem within the applicator's operation.

Printer Errors

0701: Cannot Communicate With Printer #1

Error indicating inability to communicate with printer #1.

0703: The Printer #1 Is Malfunctioning

Printer system error indicating malfunction.

0715: Thermal Head of the Printer #1 Has Run Out

Error indicating the printer thermal head has run out.

Tray Detection Control Part Errors

1503: The Problem Arose in the Tray Detector

Error indicating a problem with the tray detector.

1504: The Power Failure Occurred by Console

Error indicating power failure occurred by the console.

1505: The Tray Detector Detected Power Failure

Error indicating power failure detected by the tray detector.