ISHIDA WM-4000 User Manual

[Error content]
Unable to communicate between tray detector (P-915) and the tray
detector camera (CCD).
[Detail]
It has been decided that the CCD camera is not connected due to the
inability to obtain a proper response when attempting to set the CCD
camera.
[Solution]
[OK] -> Operate without the tray detector.
(Operate with registered trays)
[Remarks]
[Cause]
Unable to communicate between tray detector (P-915) and the tray
detector camera (CCD).
[Response]
1. Check the connection between tray detector board P915(XJ2)
and the CCD camera(CN2)
2. Replace the tray detector board P91x or the CCD camera
1506
Ishida WM-4000 Error Codes and Solutions (600-2099)
March 2015
56/84

ISHIDA WM-4000 Specifications

General

Brand	ISHIDA
Model	WM-4000
Category	Industrial Equipment
Language	English