[Error content] Applicator operation has stopped.
[Detail] The emergency stop switch was used during applicator operation
[Solution] [RETURN] button
[Remarks]
In the event error number 0485-0000 occurs after clearing this error,
respond to error 0485-0000.
[Cause] Power to the applicator was shut off during operation.
[Response]
1. Clear the emergency stop switch.
2. Check power switch (U1) input voltage (AC 200V)
3. Check power switch (U1) output voltage (DC 24V)
0608
Ishida WM-4000 Error Codes and Solutions (600-2099)
To Next Page
Loading...
