ISHIDA WM-4000 User Manual

[Error content] There is no response from the scale (P-930).
[Detail] View sub-error code
[Solution] Turn off power, [OK] button
[Remarks] Restore power after checking scale connection.
[Cause] There is no response from the scale (P-930).
[Response]
1. Check harness, connector
2. Replace P-930
1621
Ishida WM-4000 Error Codes and Solutions (600-2099)
March 2015
69/84

ISHIDA WM-4000 Specifications

General

Brand	ISHIDA
Model	WM-4000
Category	Industrial Equipment
Language	English