ISHIDA WM-4000 User Manual

[Error content] Scale initialization has not been completed.
[Detail] The response from the scale is included in the sub-error.
[Solution] [OK] button
[Remarks] Need to re-set span.
[Cause] Scale (P-930) initialization has not been completed.
[Response]
1. Perform spring span.
2. If the same error occurs, replace board P-930.
1602
Ishida WM-4000 Error Codes and Solutions (600-2099)
March 2015
67/84

ISHIDA WM-4000 Specifications

General

Brand	ISHIDA
Model	WM-4000
Category	Industrial Equipment
Language	English