ISHIDA WM-4000 User Manual

[Error content] Unable to detect label absorption timing
[Detail]
The console turns ON the label issue timing signal the moment the
applicator starts absorption. This timing signal could not be detected.
[Solution]
[Remarks] Occurs in printers #1 and #2.
[Cause] Unable to detect label absorption timing
[Response]
This error does not normally occur. Contact S/c when this error
occurs.
0719
Ishida WM-4000 Error Codes and Solutions (600-2099)
March 2015
45/84

ISHIDA WM-4000 Specifications

General

Brand	ISHIDA
Model	WM-4000
Category	Industrial Equipment
Language	English