ISHIDA WM-4000 User Manual

[Error content]
The command sent to the applicator and the command contained in
the answer are different.
[Detail]
[Solution] Restore power
[Remarks]
[Cause]
The command sent and the command received are not the same
The command sent from P-910 to P-916 and the command that
returned from P-916 are different.
[Response]
This does not occur during normal operation, but it is believed to
occur from the effects of noise. Cancel by restoring power.
0603
Ishida WM-4000 Error Codes and Solutions (600-2099)
March 2015
5/84

ISHIDA WM-4000 Specifications

General

Brand	ISHIDA
Model	WM-4000
Category	Industrial Equipment
Language	English