Sub-error Content
01 Invalid text
02 Initializing
03 Out of range
04 Unstable
05 Unable to change between A/D
06 Spring scale not set (Span adjustment is not complete)
07 Unable to send (Scale debug response)
08 No scale data (FDP)
09 Conveyor error (FDP)
10 Sensor error (FDP)
11 Zero point error during operation (FDP)
12 Scale item length error (FDP)
13 Scale item discharge error (FDP)
14 The metal detector detects an error (FDP)
15 2 items on scale error (FDP)
16 Metal detector error (FDP)
17 Upper/lower limit error
18 Check scale
19 Remove item from the weighing platter
20 Power failure detected
21 No response from the scale board (connection error)
22 Communication error (connection error)
23 Communication error (connection error)
1621
Ishida WM-4000 Error Codes and Solutions (600-2099)
To Next Page
Loading...
