3-124
PRE-DRIVING OPERATIONS AND ADJUSTMENTS
1. Insert the key into the passenger side
SRS airbag on-off switch and turn it to
the "OFF" position.
2. Leave it in the "OFF" position and
remove the key.
NOTE
• In models with a passive entry and
start system, use the mechanical
key stored in the electronic key.
NOTE
• If the key is left inserted, the switch
returns to the "ON" position.
3. When the power mode is switched to
"ON" (models with passive entry and
start system) or the starter switch is
turned to the "ON" position (models
without passive entry and start
system), ensure that the passenger
side SRS airbag OFF indicator light
comes on. While the switch is in the
"OFF" position, the passenger side
SRS airbag OFF indicator light stays
lit.
Passenger side SRS airbag OFF
indicator light
To Disable the Passenger Side SRS Airbag
NOTE
• Operate the switch when the power mode is "OFF" (models with passive entry
and start system) or the starter switch is in the "LOCK" position (models without
passive entry and start system).
5108428_sec03_PRE-DRIVING OPERATIONS.indd 124 2020/11/06 10:49:15
To Next Page
Loading...
Need help?
General
