Isuzu D-MAX 2020 - Page 400

4-124
CONTROLS AND INSTRUMENTS
When turning left or right, move the light
control switch lever up or down to flash the
turn signal light.
The turn signal indicator light on the
instrument panel flashes while the turn
signal lights are flashing.
Turn Signal Switch
ADVICE
• The turn signal lights come on
when the power mode is "ON"
(models with passive entry and start
system) or the starter switch is in
the "ON" position (models without
passive entry and start system). Do
not operate the turn signal lights
for an extended time period with
the engine stopped. Otherwise,
the battery may go flat, making it
impossible to start the engine.
RTUL40SH044101
NOTE
• If the steering wheel is only turned a small amount, turn off the signal manually.
• Lightly press and hold the lever up or down when overtaking or changing lanes.
ModelswithComfortTurnSignalLight
This is a function to flash the turn signal light three times. Moving the light control
switch lever slightly up or down and releasing it immediately flashes the turn signal
light three times.
The settings of the comfort turn signal light can be changed. Contact the nearest Isuzu
Dealer for details.
The settings of the comfort turn signal light can be changed by using the user
customization function on the MID.
Turn signal indicator light
Settings (User Customization Function)
 →Refertopage 4-46
Display indication Description
Light
Comfort turn
signal
Enable
Turns on the comfort turn
signal light.
Disable
Turns off the comfort turn
signal light.
5108428_sec04_CONTROLS AND INSTRUMENTS_P001-142.indd 124 2020/11/09 14:07:03