4-295
CONTROLS AND INSTRUMENTS
"RES (RESUME)" indicator
3. "RES (RESUME)" is displayed over
the maximum speed sign, which is
displayed on the MID by the TSR.
Display area
How to Set the Vehicle Speed Limit
from the Speed Limit Signs
Press the "RES" switch while the "RES
(RESUME)" is displayed over the maximum
speed sign.
The vehicle speed limit is set to the speed
of the displayed speed limit sign.
RES switch
Temporary Cancellation of the
System
The system is temporarily canceled when
the following operations are performed.
• When the "CANCEL" switch is
pressed
• When the main switch is pressed
NOTE
• Press the SET switch to set the set
speed.
• Even if the brake pedal is
depressed, the ISL is not canceled.
5108428_sec04_CONTROLS AND INSTRUMENTS_P143-end.indd 295 2020/11/12 15:29:11
To Next Page
Loading...
Need help?
General
