6-101
SERVICE AND MAINTENANCE
Installation
1. Attach the wiper blade to the arm.
1
2
3
2. Slide the wiper blade in the direction
of the arrow.
3. Push the tab in.
ADVICE
• Do not lower the wiper arm with its
blade removed; the windshield glass
may be scratched.
• Whenever a wiper blade has been
attached, ensure that it is locked
into place. Failure to observe this
precaution can result in the wiper
blade becoming dislocated when
the windshield wiper switch is turned
on.
5108428_sec06_SERVICE AND MAINTENANCE_P001-140.indd 101 2020/11/05 11:54:19
To Next Page
Loading...
Need help?
General
