ITech IT6400 Series - Page 101

Technical Specification
Copyright © Itech Electronic Co., Ltd. 93
(％of Intput+Offset)/℃
Display stability-30min
（％of Output +Offset）
0.02%+1mV
Display stability-8 h
（％of Output +Offset）
0.02%+2 mV
Input Common-mode
voltage
< 100Vdc to ground
Common-mode voltage
rejection
≥ 80 dB
Input impedance
4MΩ
(*1) Maximum error of OVP precision at power supply terminal under full load.
(*2) Under Fast mode, the output polarity is unchanged, the time that the power
output value changes from 10% to 90%.
(*3) The Minimum value of CC setting is 2mA.
(*4) The voltage setting value will change to 0V under power supply output is
60V.
(*5) The current readback accuracy of the 5mA Range is measured under
constant voltage mode.
(*6) Set output off.
*The above specifications may be subject to change without prior notice.