IT6400 series user manual
Copyright © Itech Electronic Co., Ltd. iii
requirements for this instrument.
20% - 80% (non condensing)
Operating up to 2,000 meters
Note
To make accurate measurements, allow the instrument to warm up for 30 min before
operation.
Regulation tag
The CE mark indicates that the product
complies with all the relevant European
legal directives. The specific year (if any)
affixed refers to the year when the design
was approved.
The instrument complies with the WEEE
Directive (2002/96/EC) marking
requirement. This affixed product label
indicates that you must not discard the
electrical/electronic product in domestic
household waste.
This symbol indicates the time period
during which no hazardous or toxic
substances are expected to leak or
deteriorate during normal use. The
expected service life of the product is 10
years. The product can be used safely
during the 10-year Environment Friendly
Use Period (EFUP). Upon expiration of the
EFUP, the product must be immediately
recycled.
Waste electrical and electronic equipment (WEEE)
directive
Waste electrical and electronic equipment (WEEE) directive,
2002/96/EC
The product complies with tag requirements of the WEEE directive
(2002/96/EC). This tag indicates that the electronic equipment
cannot be disposed of as ordinary household waste.
Product Category
According to the equipment classification in Annex I of the WEEE
directive, this instrument belongs to the “Monitoring” product.
If you want to return the unnecessary instrument, please contact
the nearest sales office of ITECH.
To Next Page
Loading...
Need help?
General
