Inspection and Installation
Copyright © Itech Electronic Co., Ltd. 13
Chapter2 Inspection and Installation
2.1 Verifying the Shipment
Unpack the box and check the contents before operating the instrument. If
wrong items have been delivered, if items are missing, or if there is a defect
with the appearance of the items, contact the dealer from which you purchased
the instrument immediately. The package contents include:
Table 1-1 Checklist of Package Contents
IT6400 series
power supply
Please refer to 1.1 Brief
Introduction for complete
models of IT6400 series power
supply.
IT-E171/IT-E172
/IT-E173/IT-E17
4
User may select an appropriate
power cord that matches the
specifications of power socket
used in the area. See the
Section 2.4 Connecting the
Power Cord for details.
It is the test report of the
instrument before delivery.
NOTE
Upon verification of the shipment, keep the package and relevant contents thereof in a
safe place. When returning the instrument for warranty service or repair, the specified
packing requirements shall be met. Refer to IT6400 User’s Manual for detailed
requirements on returns.
IT6400 series power supply is supplied with the following optional accessories
(sold separately):
To mount the instrument on a special rack,
user may select this optional.
2.2 Instrument Size Introduction
The instrument should be installed at well-ventilated and rational-sized space.
Please select appropriate space for installation based on the power supply size.
The detailed dimension drawings of the IT6400 series are as follows (unit: mm,
deviation: ±1 mm):
To Next Page
Loading...
Need help?
General
