ITech IT6400 Series User Manual

Waveform Display Function
Copyright © Itech Electronic Co., Ltd. 47
3. Press the right [DVM T/Lev] soft key. The User can select the Knob
function based on actual needs.
4. In the above interface, press the [Knob Volt] soft key. In this case, “Knob
DVM” is displayed, indicating that the Knob can adjust the grounding level
of DVM channel.

ITech IT6400 Series Specifications

General

Brand	ITech
Model	IT6400 Series
Category	Power Supply
Language	English