ITech IT6400 Series - Page 95

Technical Specification
Copyright © Itech Electronic Co., Ltd. 87
voltage
Common-mode voltage
rejection
≥ 80 dB
Input impedance
4.5MΩ
(*1) Maximum error of OVP precision at power supply terminal under full load.
(*2) Under Fast mode, the output polarity is unchanged, the time that the power
output value changes from 10% to 90%.
(*3) The Minimum value of CC setting is 10mA.
(*4) The voltage setting value will change to 0V under power supply output is
15V.
(*5) The current readback accuracy of the 20mA Range is measured under
constant voltage mode.
(*6) Set output off.
Parameters
IT6432
Rated values
(0 °C-40 °C)
Voltage
-30V-0V,0-30V
Current
±5 A
Power
150 W
Resistance
0 - 1 Ω
Load regulation
(％of Output+Offset)
Voltage
≤0.01%+2mV
Current
≤0.05%+1mA
Line regulation
(％of Output+Offset)
Voltage
≤0.02%+2mV
Current
≤0.05%+1mA
Setup resolution
Voltage
1mV
Current
0.1mA
OVP
10 mV
Resistance
1mΩ
Readback resolution
Voltage
1mV
Current
5A Range
0.1mA
5mA Range
100nA
Setup accuracy
（one year、25°C±5°C)
(％of Output+Offset)
Voltage
≤0.02%+3mV
Current
≤0.05%+3mA (*3)
OVP
0.5V (*1)
Resistance
≤0.1%+3mΩ
Readback accuracy
（one year、25°C±5°C)
(％of Output+Offset)
Voltage
≤0.02%+3mV
5A Range
≤0.05%+3mA
5mA Range
≤0.05%+2uA (*5)
Ripple
(20Hz -20MHz)
Voltage
≤ 4mVp-p / 1 mV rms
Current
≤1mArms
Setup Temp.coefficient
(％of Output+Offset)/℃
Voltage
0.005%+0.4mV
Current
0.01%+0.2mA
OVP
0.01%+50 mV
Resistance
0.02%+0.5mΩ
Readback Temp.coefficient
(％of Output+Offset)/℃
Voltage
0.005%+0.3mV
Current
5A Range
0.015%+0.1mA
5mA Range
0.005%+0.3 uA (*5)
Rise time
(Fast mode No-load)
Voltage
≤150uS (*2)
Rise time
Voltage
≤150uS (*2)