ITech IT7321 Programming Guide

System Commands
Copyright © Itech Electronic Co., Ltd. 18
Returns
<NR1>
STATus:OPERation:NTRansition
This command set the value of the Operation NTR (Negative-Transition)
register Setting parameter can determine which bit value of operation event
register is 1 and the bit will cause OPER of status byte register to be 1.
Command syntax
STATus:OPERation:NTRansition <NR1>
Parameters
0~255
Example
STATus:OPERation:NTRansition 128
Query syntax
STATus:OPERation:NTRansition?
STATus:OPERation:PTRansition
This command set the value of the Operation PTR (Positive-Transition)
register.Setting parameter can determine which bit value of operation event
register is 1 and the bit will cause OPER of status byte register to be 1.
Command syntax
STATus:OPERation:PTRansition <NR1>
Parameters
0~255
Example
STATus:OPERation:PTRansition 128
Query syntax
STATus:OPERation:PTRansition?
STATus:PRESet
System reservation command

ITech IT7321 Specifications

General

Brand	ITech
Model	IT7321
Category	Power Supply
Language	English