ITech IT7321 - Measure[:Scalar]:Current[:Ac]; Measure[:Scalar]:Power[:Ac][:Real]; Measure[:Scalar]:Power[:Ac]:Apparent; Measure[:Scalar]:Power[:Ac]:Pfactor

Measurement Commands
Copyright © Itech Electronic Co., Ltd. 36
Command syntax
MEASure[:SCALar]:VOLTage[:AC]?
Returns
<NR2>
MEASure[:SCALar]:CURRent[:AC]?
This command is used to read the current current output value.
Command syntax
MEASure[:SCALar]:CURRent[:AC]?
Returns
<NR2>
MEASure[:SCALar]:POWer[:AC][:REAL]?
This command is used to read the current output active power value.
Command syntax
MEASure[:SCALar]:POWer[:AC][:REAL]?
Returns
<NR2>
MEASure[:SCALar]:POWer[:AC]:APParent?
This command is used to read the current output apparent power value.
Command syntax
MEASure[:SCALar]:POWer[:AC]:APParent?
Returns
<NR2>
MEASure[:SCALar]:POWer[:AC]:PFACtor?
This command is used to read the current output power factor value.
Command syntax
MEASure[:SCALar]:POWer[:AC]:PFACtor?
Returns
<NR2>