FC300 Getting Started Guide 67
Proprietary and Confidential
Top and Bottom Views
1 Flashlight
2 Hirose connector, covered
3 Hand strap bottom connector, attached
4 I/O (input/output) connector, covered
5 Tether for I/O connector cover
6 Latches for shoulder strap
Charging an FC300 from a Vehicle
The FC300 can be charged in a vehicle without using the vehicle
dock. The FC300 charger cable consists of a 12 volt DC power
supply adapter to plug into the vehicle's 12 volt DC power supply
receptacle (cigarette lighter), and a connector to plug into the I/O
(input/output) connector on the bottom of the FC300.
Note This charger cable is only for direct charging to an
FC300. Do not use this cable with a vehicle dock.
To Next Page
Loading...