ITRON FC300 Getting Started Guide

Introduction
FC300 Getting Started Guide 13
Proprietary and Confidential
• Suspend. Occurs when the FC300 is inactive for a
predetermined period of time (see Setting Power Schemes on
page 37), the user presses Power when the FC300 is already on,
or selects Windows logo > Suspend. The FC300 remains in the
Suspend state until any of these wake-up events occur:
• Pressing Power.
• External power is applied.
• Off. Occurs when the main battery and the backup battery are
depleted. You never turn off the FC300; you only suspend it.
To power on the FC300
• Press Power.
To suspend the FC300
• Press Power, or from the FC300 desktop, select Windows logo
> Suspend.
Resetting the FC300
If your FC300 does not respond as expected (such as locks up or fails
to operate), a reset may correct the issue. There are two types of
reset:
• Soft Reset—also referred to as a warm boot—does not affect the
operating system and no saved data is lost. If done within an
application, that application closes any data that was not saved
prior to the soft reset.
• Hard Reset—also referred to as a cold boot—returns the
handheld to its original configuration. Data that was not
previously saved may be lost.

ITRON FC300 Specifications

General

Brand	ITRON
Model	FC300
Category	Handhelds
Language	English