FC300 Getting Started Guide 69
Proprietary and Confidential
Maintenance
Consider the following maintenance issues:
• Cleaning the FC300
• Batteries
• Exposure to moisture
Cleaning
The FC300 should only be cleaned as needed.
Do
• Remove lint and dust with clean, filtered canned air.
• If needed, apply a small amount of a mild household cleaning
chemical to a soft, non-abrasive cloth and gently wipe the soiled
touch screen surface or imager window.
Don't
• Do not spray any cleaning chemical directly onto the FC300.
• Do not use harsh chemicals such as hand creams or insect
repellent on the FC300 as they can damage the materials and
void the warranty.
• Do not scrub the touch screen surface or imager window.
Batteries
While attached to an external power source, the FC300's main battery
and backup battery are recharged. Frequent connection to an external
power source is recommended to maintain the backup battery charge
status as the backup battery cannot be recharged by a dead or missing
main battery.
To Next Page
Loading...
Need help?
General