20
07610-003-78-18-N
DRAIN QUENCH KIT INSTRUCTIONS
INSTALLATION
3. Connect user-supplied 115V cord (from facility power) into solenoid box as shown below:
4. Connect cold water to inlet side of solenoid valve.
IF THERE ARE ANY ISSUES AFTER INSTALLATION, PLEASE CONTACT
TECHNICAL SERVICE AT 1-888-800-5672.
5. Secure all electrical (ensure connection is to 120V facility power) and plumbing connections.
6. Restore water and power to the machine and verify drain quench performance.
Power cannot
be taken from
the machine!
!
CAUTION
To Next Page
Loading...
