CONTROLS 4
en-22
4.2.5 MOW SWITCH ____________________________________________________________
The mow switch engages mow speed and cutter rotation.
To cut grass, push the front of the switch and move the joysticks forward to lower the decks.
When engaged the yellow LED on the pod is illuminated.
To stop the blade, push the rear of the rocker switch.
When lifted out of work or the operator leaves the seat, blade rotation is stopped.
4.2.6 4 WHEEL DRIVE IN REVERSE DIRECTION SWITCH _____________________________
Engages 4 wheel drive while the vehicle is in reverse direction. Hold the switch to keep
engaged.
Push the front of the switch to turn ON
Release the switch to turn OFF
4.2.7 CRUISE CONTROL SWITCH _________________________________________________
Used to engage the cruise function when the cutters are engaged.
Automatic mode should be selected to enable cruise control.
To engage cruise control:
Push the rocker switch to engage the cruise function.
To disengage cruise control
Push the rocker switch to disengage the cruise function.
Note. Operation of the transmission pedal, applying the parking brake and reactivation of the cruise control switch will
deactivate the cruise control.
To Next Page
Loading...
Need help?
General
