File Version: 3.4 / JAKA Zu Series Hardware User Manual
If the brake is released manually, the joint of the robot may move under gravity, so it is necessary to
effectively support the robot and tools or workpieces installed on the robot before manually releasing
the brake.
2.10
The following labels are safety warning labels and product label on the robot and the control cabinet. During the
operation, be sure to follow the instructions and warnings on the labels to ensure safety. Do not remove the
labels at will and remote stick labeled parts or units and their surrounding area with caution to avoid damage to
the labels. Product labels and robot model figures are only for reference.
Building 6, No. 646, Jianchuan Road ,
Minhang Distric t, Shanghai, China
Max. Payload:
Max. Reach:
Input:
Weight:
Enclosure Type:
To Next Page
Loading...
