File Version: 3.4 / JAKA Zu Series Hardware User Manual
13 Design Standards and Certification
13.1
13.1.1
The robot is certified by the following inspection bodies.
JAKA robot has passed the safety certification of the
notified body, SGS, which complies with the EU
machinery directive 2006/42/EC.
JAKA robot has been evaluated as compliant with the KCs
safety standard.
13.1.2
JAKA robot undergo continuous internal factory tests and
type testing procedures.
13.1.3
JAKA robot has been certified according to the following directives.
JAKA robot meets the basic requirements of the CE-MD,
CE-LVD, CE-EMC and CE-RED directives.
Low Voltage Directive (LVD)
Electromagnetic
Compatibility (EMC)
Radio Equipment Directive
(RED)
Note:
1. Robots are covered by both the MD and LVD directives. Based on the MD directive, only MD is required to
be evaluated, but the harmonized standards of LVD are used simultaneously to ensure electrical safety when
conducting MD assessments.
2. EMC is mainly used to ensure compliance of robot without Wi-Fi module, EMC compliance of robot with
Wi-Fi module is included in RED.
3. Certificates and declarations can be found on the official website www.jakarobotics.com.
To Next Page
Loading...
