98
r
r Adjustable Start-Up Speed
The machine will start running slowly and the sewing
speed will gradually increase to maximum. You can
select the desired start-up speed from slow, medium
or high by pressing the corresponding key, and set the
speed for the start/stop button or foot control individually.
q
w
Ordinary Sewing Setting Mode
q Auto thread tension
You can adjust the auto thread tension level by pressing
the “+” or “–” key.
w Low bobbin thread warning
You can adjust the low bobbin thread warning level by
pressing the “+” or “–” key.
To turn off the low bobbin thread warning, press the “–”
key until “OFF” shows in the window.
e Needle stop position
The machine always stops with the needle in the down
position except when sewing buttonholes, specialty
stitches, monograms, etc. However you can change the
needle stop position to up by pressing the needle up key.
NOTE:
The machine stops with the needle in the down
position if Foot-up key option is turned on, even if the
needle stop position is set to up position.
Press the next page key to show the next menu.
e
To Next Page
Loading...
