Janome Skyline S9 - Connecting Lace Design Re20 A-1 (Designs for Water Soluble Stabilizer)

145
Connecting Lace Design RE20a-1 (Designs for water
soluble stabilizer)
You can connect the large lace design RE20a-1 vertically
or horizontally.
Example: Connecting the Lace Design RE20a-1 vertically
z Draw centerlines on the water soluble stabilizer with
tailor’s chalk.
The water soluble stabilizer and vertical line should be
long enough to connect following patterns.
x Set the water soluble stabilizer in the hoop RE20a and
attach the hoop to the carriage.
Select the design RE20a-1 (Designs for water soluble
stabilizer).
c Press the start/stop button and sew.
Remove the hoop from the carriage and the stabilizer
from the hoop.
z
x
c